Category: Mercedes Benz

Oil service reset Mercedes Benz Viano

Reset oil Mercedes Benz Viano warning light that appears in the dashboard of your car can be reset manually without using a computer or other device costly.

Follow these instructions to reset service interval Mercedes Benz Viano / turn off service indicator Mercedes Benz Viano:

  1. Ensure ignition is switched OFF.
  2. Switch ignition ON and briefly press button[A] twice.
  3. Within 10 seconds: Switch ignition OFF.
  4. Press and hold button [A].
  5. Switch ignition ON.
  6. Continue to hold button [A].
  7. The remaining distance will be displayed.
  8. After aproximately 10 seconds a warning sound will be heard and the new remaining distance will appear in the digital display.
  9. Release button [A].

Oil reset service light indicator Mercedes Viano 2008

This reset is required to be made only after the engine maintenance performed by replacing oil and filters corresponding engine that comes with your vehicle. This operation must be performed by a qualified and experienced to not cause serious damage to the engine and the risk can not be used.

Oil service reset Mercedes Sprinter 906

Reset oil Mercedes Benz Sprinter 906 warning light that appears in the dashboard of your car can be reset manually without using a computer or other device costly.

Follow these instructions to reset service interval Mercedes Benz Sprinter 906 / turn off service indicator Mercedes Benz Sprinter 906 (after an oil change):

  1. Turn igniton on
  2. Wait for the total milage appear
  3. Press and Hold “0” button
  4. Wait for the beep sound
  5. After beep stop pressing “0” and press “M” button until Reset .31 or .51
  6. Press and hold “0” for 3 sec
  7. Press again “0” once

This reset is required to be made only after the engine maintenance performed by replacing oil and filters corresponding engine that comes with your vehicle. This operation must be performed by a qualified and experienced to not cause serious damage to the engine and the risk can not be used.

Oil service reset GL – Class

2007-2012

1. Turn the ignition to position 1. (close all doors
2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer or temperature reading is shown in the multi information display.)
3. Press the TRIP reset button (center button on instrument panel) quickly 3 times. An audible beep will be heard followed by the battery voltage displayed.
4. Press the scoll forward/back button (left side of steering wheel) to highlight the “”Service menu””.”
5. Use the +/- buttons to select “”Confirmation”” menu. Press the system select button to confirm. The menu item “”Complete service”” is highlighted.”
6. Press the system selection button to confirm. “”Service confirmed”” appears.”
7. Use the scroll forward/back button to exit the menu.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset R – Class

2006-2012

1. Turn the ignition to position 1. (close all doors
2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer or temperature reading is shown in the multi information display.)
3. Press the TRIP reset button (center button on instrument panel) quickly 3 times. An audible beep will be heard followed by the battery voltage displayed.
4. Press the scoll forward/back button (left side of steering wheel) to highlight the “”Service menu””.”
5. Use the +/- buttons to select “”Confirmation”” menu. Press the system select button to confirm. The menu item “”Complete service”” is highlighted.”
6. Press the system selection button to confirm. “”Service confirmed”” appears.”
7. Use the scroll forward/back button to exit the menu.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset SLS – Class

2010-2012

1. Turn the ignition to position 1. (close all doors
2. Press the system selection button (left button on left steering wheel controls) repeatedly until the kilometer reading is shown in the multi information display.)
3. Press the system selection button (located on the far left of the steering wheel) repeatedly until the menu item “”trip”” with highlighter is stored in the multi-function display. *Trip remains selected for 5 seconds so you need to move to step 4.”
4. First press and hold the accept phone call button and within 1 second also press and hold the OK button for 5 seconds. The workshop menu will appear in the display showing “”vehicle data
5. Press the scroll forward button (lower button on left steering wheel controls) to highlight “”ASSYST PLUS”” and then confirm by pressing OK button.”
6. Press scroll forward button (lower button on left steering wheel controls) to highlight “”Full Service”” and then confirm by pressing OK button.”
7. Press scroll forward button until “”YES”” is highlighted and confirm swith OK button. “”No take-back possible”” appears.”
8. Press scroll forward button until “”Confirmation”” is highlighted and confirm with OK button. “”Full service carried out”” appears.”
9. Press OK button and back button (standalone button on left steering wheel controls) repeatedly until the menus are exited.
10. Turn the ignition off and then start the engine to verify the indicator has been reset.