Oil service reset Subaru WRX

  1. Turn the ignition to run (one position before starting engine).
  2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen.
  3. Use the Up or Down arrow to highlight the MAINTENANCE menu and pull the i/Set switch towards you.
  4. Select the maintenance item (i.e. Engine Oil, Oil Filter) and pull the i/SET switch towards you.
  5. Change the next service date and interval with the Up and Down arrow and confirm by highlighting SET and pull the i/SET switch towards you. The reset is complete when the screen shows Setting Complete.
  6. Turn the ignition off and then start the engine to verify the indicator has been reset.
    *Reset only available on models with the multi-information display

Oil service reset Chrysler 300

  1. Turn the ignition to run (one position before starting engine).
  2. Push and release the DOWN arrow button to scroll downward through the main menu to “ Vehicle Info.”
  3. Push and release the RIGHT arrow button to access the ”Oil Life” screen.
  4. Push and hold the OK button until the “ Oil Life” screen displays.
  5. Push and release the DOWN arrow button to select “ Yes,” then push and release the OK button to select reset of the Oil Life.
  6. Push and release the Up arrow button to exit the submenu screen.
  7. Turn the ignition off and then start the vehicle to verify the indicator has been reset.