Category: Honda

Oil service reset Honda Accord

Reset oil Honda Accord warning light that appears in the dashboard of your car can be reset manually without using a computer or other device costly after an oil change.

Follow these instructions to reset service interval Honda Accord / turn off service indicator Honda Accord (after an oil change):

  1. Turn the ignition on (do not start the engine).
  2. Display the engine oil life by repeatedly pressing the SELECT/RESET button.
  3. Press and hold the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance item codes blink.
  4. Press the SELECT/RESET knob for 5 seconds or more. The displayed maintenance item codes disappear, and the engine oil life display returns to 100%.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

For Vehicles Equipped with MID:

  1. Turn the ignition on (do not start the engine).
  2. Press the UP/DOWN buttons on the lower right of the steering wheel to select VEHICLE SETTINGS, then press the SEL/RESET button.
  3. Press the UP/DOWN buttons until MAINTENANCE RESET appears on the display, then press the SEL/RESET button. The oil life reset mode is displayed on the MID.
  4. Select RESET with the UP/DOWN buttons, then press the SEL/RESET button. The displayed maintenance items disappear and the oil life is reset to 100%.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

This reset is required to be made only after the engine maintenance performed by replacing oil and filters corresponding engine that comes with your vehicle. This operation must be performed by a qualified and experienced to not cause serious damage to the engine and the risk can not be used.

Oil service reset Honda CR-V

Models with information display:

1. Turn the ignition switch to ON (do not start the engine).
2. Display the engine oil life by repeatedly pressing the (Select/Reset) knob.
3. Press and hold the knob for 10 seconds or more. The engine oil life indicator and the maintenance item codes blink.
4. Press the knob for five seconds or more. The displayed maintenance items disappear, and the engine oil life display returns to 100%.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Models with multi-information display:

1. Turn the ignition switch to ON (do not start the engine).
2. Select VEHICLE SETTINGS using the up or down arrows, then press the SEL/RESET button.
3. Select MAINTENANCE RESET using the up or down arrows, then press the SEL/RESET button.
4. Select RESET using the up or down arrows, then press the SEL/RESET button. The displayed maintenance items disappear, and the engine oil life display returns to 100%.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light Honda Accord

1) Turn they key to the II position

2) Turn the key to the off position, and push and hold in the odometer reset button

3) Turn they key back to the II position, while still holding the button.

4) After about 10-15 seconds, the light should go off.

Service oil reset Honda S2000

2000-2005
Turn the ignition off.
Press and hold the TRIP METRE RESET button while you turn the ignition switch to run (one position before starting engine).
Continue holding the button until the indicator resets (indicator light goes out).
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006
Turn the ignition to run (one position before starting engine).
Press the TRIP button until the engine oil life indicator is displayed.
Press the trip button for more than 10 seconds. The engine oil life indicator and the maintenance items code(s) will blink.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007
Turn the ignition to run (one position before starting engine).
Press the TRIP button until the engine oil life indicator is displayed.
Press the trip button for more than 10 seconds. The engine oil life indicator and the maintenance items code(s) will blink.
Press the TRIP button for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to “100”.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Honda Ridgeline

2006-2008
Turn the ignition to run (one position before starting engine).
Press the SELECT button repeatedly until the engine oil life display or the service message is displayed.
Press the RESET button for about 10 seconds. You will see a “MAINT RESET” message.
Select the appropriate answer, “MAINT RESET N” (NO) OR “MAINT RESET Y” (YES) by pressing the SELECT button repeatedly. “N” or “Y” is displayed on the outside temperature display.
Select the ëëMAINT RESET Yíí (YES), and press and hold the RESET button again to reset the engine oil life to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2009-2010
Turn the ignition to run (one position before starting engine).
Press the SELECT/RESET knob repeatedly until the engine oil life indicator is displayed.
Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.