1. Turn the ignition to run (one position before starting engine).
*Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
2. Press and hold the SET/RESET (arrow) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.
Author: oilreset.eu
Oil service reset Toyota Prius
1. Press the “ENGINE START STOP” switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
4.Continue to press and hold the button until the trip meter displays “000000” and the display indicates the reset is complete.
5.Turn the ignition off and then start the engine to verify the indicator has been reset.
Oil service reset Nissan Rogue
1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
2. Press the square button, located on the left side of the steering wheel, to display the SETTINGS mode.
3. Use the up/down arrow buttons to highlight SETTINGS and confirm with the ENTER button.
5. From the SETTINGS menu select MAINTENANCE and confirm with the ENTER button.
6. Select the maintenance item to be reset; reset distance and confirm with the ENTER button.
7. Repeat for any other MAINTENANCE items.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.
Oil service reset Chevrolet Cruze
1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%. When prompted select YES or NO. Press the SET/CLR button to confirm.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
Oil service reset Toyota RAV4
1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the DISP button turn the igniton on (do not start the engine).
4. Continue to press and hold the button until the trip meter displays “000000”.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.