Oil service reset Dodge Dart

1. Turn the ignition to run (one position before starting engine).
2. Push and release the DOWN arrow button to scroll downward through the main menu to “Vehicle Info”.
3. Push and release the RIGHT arrow button to access the ”Oil Life” screen.
4. Push and hold the RIGHT arrow button to reset the gauge and numeric display to 100% for ”Oil Life.”
5. Push and release the Up arrow button to exit the EVIC screen.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Chrysler 300

1. Turn the ignition to run (one position before starting engine).
2. Push and release the DOWN arrow button to scroll downward through the main menu to “ Vehicle Info.”
3. Push and release the RIGHT arrow button to access the ”Oil Life” screen.
4. Push and hold the OK button until the “ Oil Life” screen displays.
5. Push and release the DOWN arrow button to select “ Yes,” then push and release the OK button to select reset of the Oil Life.
6. Push and release the Up arrow button to exit the submenu screen.
7. Turn the ignition off and then start the vehicle to verify the indicator has been reset.

Oil service reset Mitsubishi L200

1. Close all doors and bonnet.
2. Switch on ignition.
3. On the LCD display there are three buttons on the left, navigate, info and set up.
5. Press and hold the “set up” button for 25-30 seconds.
6. You will now see “do you wish to reset the service reminder”
7. Select yes/o.k.
8. Follow the on screen instructions to exit set up.
9. Switch ignition off.

Oil service reset Volkswagen Golf 6

Reset oil Volkswagen Golf 6 warning light that appears in the dashboard of your car can be reset manually without using a computer or other device costly.

Follow these instructions to reset service interval Volkswagen Golf 6:

1. Get into the driver’s seat and make sure all the doors are closed
2. Insert the ignition key
3. With the ignition switched-off, press and hold the “0.0” button (it’s on the lower center portion of the dash)
5. With the “0.0” button depressed, switch-on the ignition (but don’t start the engine)
6. Once the ignition is turned-on, release the “0.0” button
7. Press the “0.0” button again to reset the service reminder message.

This reset is required to be made only after the engine maintenance performed by replacing oil and filters corresponding engine that comes with your vehicle. This operation must be performed by a qualified and experienced to not cause serious damage to the engine and the risk can not be used.