2012
1. Turn the ignition to run (one position before starting engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.
Oil Reset, Oil Light Reset, Oil Life, Reset Maintenance Light
Complete instructions on how to reset the oil service engine indicator of most car brands without the use of an additional computer
2012
1. Turn the ignition to run (one position before starting engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.
Do you own a MK4 Mondeo, New Shape Transit or MK2 face lift Focus?
Do you do your own servicing or have had it serviced and still have the oil service light on?
Here are the instructions to switch off the service light:
THIS INFORMATION IS ONLY TO BE USED AFTER YOUR VEHICLE HAS BEEN SERVICED.
Turn the ignition on (engine not running but dash lights illuminated).
Turn the ignition off.
Press down both the Accelerator (Throttle) and Brake peddles.
Turn the ignition on (engine not running but dash lights illuminated).
Keep both the Accelerator (Throttle) and Brake peddles held down for between 15 and 30 seconds.
Turn off ignition.
Release peddles.
Turn the ignition on (engine not running but dash lights illuminated).
Your service light should now be out.
Oil service reset Dodge Avenger, 2008, 2009, 2010.
Turn the ignition to run (one position before starting engine).
Fully depress the accelerator pedal slowly three times within 10 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Oil service reset Dodge Caliber, 2008, 2009, 2010.
Turn the ignition to run (one position before starting engine).
Fully depress the accelerator pedal slowly three times within 10 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Oil service reset Dodge Challenger, 2008, 2009, 2010.
Turn the ignition to run (one position before starting engine).
Fully depress the accelerator pedal slowly three times within 10 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.