How to Reset the “MAINT REQD” Light on Toyota Sienna

1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

Polo MK4 Service Light Reset

Depending on your car/engine, it works it out as 10000miles or 12months, whichever comes first I think.
On a MkIV Golf you reset it like this:

1. Push and hold the odometer button.
2. Turn on ignition.
3. Turn digital clock button clockwise, and choose the service you want to reset.
4. Turn off ignition.

Your Service indicator should now have been reset.

I would imagine the above is the same on a Polo. If not, hopefully someone will come along to help!

Reset Your Service Light Peugeot

If that spanner symbol has come up on your dashboard then it’s time your car was due a service. The symbol is just a periodic reminder, it doesn’t actually come up to denote a fault – the ‘check engine’ symbol does that.

If you service the car yourself and want to reset it or your garage has forgotten to reset it, you can do it yourself quite easily with the following simple steps:

This will work with the following models:

Peugeot 106 (1999 on)
Peugeot 206 (1998 on)
Peugeot 306 (1996 on)
Peugeot 307 (1996 on)
Peugeot 406 (1998 on)
Peugeot 607 (2000 on)
Peugeot 806 (1999 on)
Peugeot Expert (1999 on)
Peugeot 807 (2002 on)
Peugeot Partner (1999 on)
Peugeot Boxer (2002 on)

Procedure to Reset Peugeot Service Light as follows:

1. Switch the Ignition Off

2. Press and hold the tripmeter (mileage reset) button on the dash

3. Now switch the ignition to the ON position

4. Keep the button pressed for 10 seconds

5. The display will read ‘0’ and the service symbol will extinguish. Job done.