Change oil.
Turn motor ignition switch to on but don’t start
Pull off emergency kill switch plate
Pull emergency kill switch 3 times in less than 7 seconds.
Replace kill switch plate.
Oil Reset, Oil Light Reset, Oil Life, Reset Maintenance Light
Complete instructions on how to reset the oil service engine indicator of most car brands without the use of an additional computer
Change oil.
Turn motor ignition switch to on but don’t start
Pull off emergency kill switch plate
Pull emergency kill switch 3 times in less than 7 seconds.
Replace kill switch plate.
Instructions
1. Pull the vehicle over to a safe area, if the light comes on while driving. If you are very close to a store that sells motor oil, stop there. Do not continue driving with the indicator light lit, as severe engine damage may occur.
2. Turn off the vehicle’s engine and open the hood. Locate the oil filler cap and oil dipstick on the top-front of the engine.
3. Check the engine oil level on the oil dipstick. If the engine oil is low, remove the oil cap and add oil until the oil level on the oil dipstick reaches the “Full” mark.
4. Replace the oil cap and restart the Kia. The oil light should turn off within a few seconds of starting the vehicle.