Think you press the trip bottom on the dash, whilst turning the ignition on, and hold it down for 10 seconds.
Tag: dash
Oil service reset Jeep Cherokee SRT8
On my ’08 I just had the oil change indicator come on, and I successfully reset it. The point is that the message took a few seconds after turning the key on to appear in the dash. You need to wait until the message appears, then you have 10 seconds to do the 3 pedal depresses. It doesn’t work if you start depressing the pedal immediately after turning the key on, if you don’t wait for the oil change message to appear.
Service oil reset Acura Integra
1986-1990
Reset the indicator by inserting the key in the slot below the indicator.
or
Turn ignition to (II) – do not start the engine.
Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1991-1993
Reset the coloured indicator by inserting the key in the slot below the indicator.
1994-1995
Turn ignition to (II) – do not start the engine.
Press and hold the RESET button located at the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1996-2001
Turn ignition to (II) – do not start the engine.
Press the RESET button located below and to the right of the steering column (feel for a soft spot) until light goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.