Oil Reset, Oil Light Reset, Oil Life, Reset Maintenance Light
Complete instructions on how to reset the oil service engine indicator of most car brands without the use of an additional computer
1. Insert the key into the ignition but leave the ignition turned off.
2. Press and hold the trip odometer reset button.
3. Turn the ignition to ON.
4. Press and release the MIN clock adjustment button.
5. Release the trip odometer reset button when the oil change light resets.
Change oil.
Turn motor ignition switch to on but don’t start
Pull off emergency kill switch plate
Pull emergency kill switch 3 times in less than 7 seconds.
Replace kill switch plate.
Instructions
1.Sit in the driver’s seat of the XL7. Insert the ignition key and turn it to “RUN.” Do not start the engine.
2.Press and release the gas pedal three times within five seconds. Watch for the engine oil light to flash, indicating that the system is reset.
3.Turn the key to “OFF” and remove it from the ignition.
This Maintenance light is a reminder : “TIME FOR AN OIL CHANGE!”
1. Turn the ignition key to the ‘OFF’ position with the trip meter A reading shown.
2. Turn the ignition key to the ‘ON’ position while holding down the trip meter ‘RESET’ button.
3. Hold down the knob for at least 5 seconds. The odometer indicates ‘000000’ and the light goes off.
How can you reset service light, maintance on Toyota Avensis
1. Set the multi-information display to TRIP A.
2. Turn the ignition switch off.
3. Press and hold the ODO / TRIP switch, and turn the ignition switch on (IG).
4. After turning the ignition switch on (IG), keep holding the switch for at least 5 seconds.