BMW X5 2002 Oil Reset

BMW X5 Engine Oil Service reset

Turn the ignition to “0”
Press and hold odometer button and turn the ignition to “1”.
Hold odometer button pressed for approximately 5 seconds until the display shows: “Inspektion Re /
Release and press odometer button again until Reset flashes
Release and press odometer button shortly.
Release and press odometer button again.
The next oil service interval will be shown and will disappear.
Oil service lamp is now reset

Note: To abort the procedure at any time: turn the ignition to “0”.

Reset the Service Lights on a BMW 1-Series

Many models in the BMW 1-series are equipped with a maintenance system that monitors driving conditions to calculate when regular maintenance should be completed. When the computer determines it is time for regular service, a reminder light is illuminated on the control panel. After the scheduled service is performed, the service lights should be reset in order for the computer to accurately track when the next service will be due.

Instructions

1. Insert the key into the ignition.

2. Press the “Start/Stop” button. Wait for the service reminder lights to turn on and off.

3. Press and hold the trip odometer “Reset” button.

4. Release the “Reset” button when the service menu appears.

5. Press the “Menu” button on the end of the turn signal arm to move through the menu until the service reset option is highlighted.

6. Press and hold the “Reset” button until the service light resets.

BMW 525i service light reset

The good news is you can do it yourself as i explained to the car owner.

Here is how:

With the ignition off.

Press and Hold the trip meter button,

keep held in and turn ignition to position 1 this is the first click the one before the ignition lights come on

Keep the button pressed in for about 5 seconds until you see “Oil Service” or “Inspection” with “Reset” or “Re” in the display.

(On vehicles with “High” cluster, you will also see the amount of fuel in litres remaining until next service).

Quikly release and Press the button again now hold for a further 5 seconds or until “Reset” or “Re” flashes.

While this display is flashing,quickly release and press the button again to reset the Service Interval.

After the display has shown the new service interval you should see END SIA” for about 2 secs.

Please note this procedure should only be used after you car has been serviced and i would qeustion any company who is unable to reset the

service/oil light either using diagnostic equipment or using this method after they have have serviced a vehicle.

Reset computer after oil change on 2006 bmw 325xi

Turn the car on. Wait about a minute for the computer to get to normal.
press and hold the travel mile reset button. Hold it untill an ! in a triangle appears. then your maintanance info will pop up. select the item to reset. and tap the side button on the wand atached to the stearing wheel. this button is what you use to browse through your computer. press the button once it will say “reset” press and hold it the second time and it will say reset, hold for 5 seconds or so and it will show a check mark next to “reset” confirming it has reset.

Reset Service Indicator of BMW 3 E46 Chassis

Turn key switch ON or when start engine, the instrument panel will display “OIL Service” or“INSPECTION” and left distance for several seconds. If “Service” or“ INSPECTION” are lit all the time and the left distance is next to “0”? it indicates that it needs oil service reset.

Reset by manual :
1. Press RESET button in the left of instrument panel.
2. Turn key ON and to ACC position.
3. Waiting for the instrument displays “OIL Service” or “INSPECTION” is flashed.
4 Release RESET button, then press five seconds, the screen will display RESR or RE is flashed. Release RESET button again and press again till the screen displays “25000km”. Now reset is completed.

When you find there is “-“symbol in front of the left distance number in the screen, and you can’t do reset with the above method, now you can use X-431 to reset oil service.