Tag: Release

BMW X5 2002 Oil Reset

BMW X5 Engine Oil Service reset

Turn the ignition to “0”
Press and hold odometer button and turn the ignition to “1”.
Hold odometer button pressed for approximately 5 seconds until the display shows: “Inspektion Re /
Release and press odometer button again until Reset flashes
Release and press odometer button shortly.
Release and press odometer button again.
The next oil service interval will be shown and will disappear.
Oil service lamp is now reset

Note: To abort the procedure at any time: turn the ignition to “0”.

Reset Service Message Volvo S80

S80

Turn ignition switch to position I
Press and hold “day counter reset button”
Turn ignition to position II
Continue holding day counter for about 10 seconds
While SRL flashes, release day counter button
Should hear “beep-beep” to confirm command accepted

Reset Service Light Volvo S40, V40

S40 and V40 (1999+)

1. Hold down the odometer button
2. Turn the ignition so all the lights come on
4. Keep holding the odometer down for 30 secs or until the service light starts flashing
5. Release the odometer button while service light flashing
6. Turn off and on again to check

Oil service reset Eighty-Eight

1994-1995

Engine Oil Life Monitor
Turn the ignition to run (one position before starting engine).
Display the oil life index on the Driver Information System.
Hold the RESET button for 5 seconds. When a DIC message of RESET is displayed and the oil life index equals 100%, the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Change Oil Soon
Turn the ignition to run (one position before starting engine).
Press OIL button and release.
Select OIL menu by pressing MODE button.
Press and hold the RESET button for 5 to 7 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1996-1997

Turn the ignition to run (one position before starting engine).
Display the oil life index on the Driver Information System.
Hold the RESET button for 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1998

Turn the ignition to run (one position before starting engine).
Press the TRIP button on the Driver Information System (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING.
Press and hold the RESET button on the DIC switch for more than 5 seconds. The oil life will change to 100%. The engine oil life monitor is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1999

Turn the ignition to run (one position before starting engine).
Press and hold the OIL RESET button in the IP storage compartment for at least 5 seconds, but no more than 60 seconds.
After 5 seconds, observe the CHANGE OIL SOON light flash 4 times before light turns off. This indicates that the engine oil life monitor system has reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Delta 88

1982-1991

Turn the ignition to run (one position before starting engine).
The oil life index may be reset by pressing and holding the OIL and RESET buttons for approximately 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1992-1993

Turn the ignition to run (one position before starting engine).
Press the TEST button and release.
Press the OIL button and release.
Press and hold the RESET button for approximately 7 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.