Tag: models

Oil service reset Volkswagen Jetta

1993-1999
Turn the ignition to run (one position before starting engine).
Press and hold the button located under the speedometer.
Switch ignition off and release button. Message OIL appears in the display.
Press MINUTE button of digital clock or button for setting analog clock only as long as 5 dashes appears in display.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2000-2004

Reset may be similar to previous year or other models – Oil Reset will verify and update site.

2005-2010

Manual Reset:
Turn the ignition to run (one position before starting engine).
Press and HOLD the trip-odometer button “0.0”.
Turn your key to run (one position before starting engine).
Release the trip-odometer button.
Push and release the Clock Minute Set Button “min”.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Honda Insight

2000-2005
Turn off the engine.
Press and hold the TRIP button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the “MAINT REQD” indicator goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2006
Turn off the engine.
Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2010
Turn the ignition to run (one position before starting engine).
If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly until it is.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

*Models equipped with the keyless access system have an engine start/stop button instead of an switch. ON Mode is equivalent of ignition (II).

Service oil reset Acura ZDX

2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
*Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).

Service oil reset Acura TL

1995-1998
Reset the coloured indicator by inserting the key in the slot below the indicator.
1999-2000
Turn the key to off position.
Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start engine.
Hold the SELECT and RESET buttons until the indicator resets, 10 seconds.
Turn ignition off and then start the engine to verify the indicator has been reset.
2001-2003
Turn the key to off position.
Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II).
Continue to hold buttons until the indicator disappears.
Turn ignition off and then start the engine to verify the indicator has been reset.
2004-2005
Turn ignition to (II) – do not start engine.
Press the SELECT/RESET button until the oil life displays.
Press and hold the SELECT/RESET button for 10 seconds, until the information displays asks for confirmation.
Press the SELECT/RESET button to select OK to reset the display.
Turn ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
*Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).

Service oil reset Acura RL

2005
Turn ignition to (II) – do not start engine.
Press the SELECT/RESET button until the oil life displays.
Press and hold the SELECT/RESET button for 10 seconds, until MAINTENANCE RESET displays.
Press the SELECT/RESET button to select OK to reset the display.
Select RESET on the display and press the SELECT/RESET button.
Turn ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
*Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).