Tag: centre

Oil service reset Chevrolet GMC Trucks Colorado/Canyon

2004

Turn the ignition to run (one position before starting engine).
Display OIL LIFE on the DIC by pressing the reset stem button.
Press and hold the reset stem. The oil life will change to 100% and a beep will sound.
Turn the ignition off and then start the engine to verify the indicator has been reset.

or

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2005-2010

Turn the ignition to run (one position before starting engine).
Press and release the TRIP/RESET stem button in the DIC until the OIL LIFE message is displayed (located in the lower centre of instrument cluster).
Once the alternating OIL LIFE and RESET messages appear on the DIC display, press and hold the reset stem until several beeps sound. This confirms that the oil life system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Chevrolet GMC Trucks Acadia

2007

With Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Press the MODE button until the DIC reads OIL LIFE LEFT/HOLD SET TO RESET.
Press and hold the SET button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Without Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010

With Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Press the vehicle information button (i) until OIL LIFE REMAINING displays.
Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Without Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine). The vehicle must be in PARK (P) to access this display. Press the trip odometer reset stem until OIL LIFE REMAINING displays.
Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Mercury Monterey

2004-2007

Turn the ignition to run (one position before starting engine).
Press the STATUS control to access the System Check function.
Press RESET to reset oil %.
Press and hold the RESET control to set to 100%. After a successful reset, the message centre will display OIL LIFE SET TO 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Mercury Mountaineer

1999-2001

Turn the ignition to run (one position before starting engine).
press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2002-2003

Turn the ignition to run (one position before starting engine).
Press the SETUP control to access the System Check function.
Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”.
Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”.
Press and hold the RESET control to display “OIL LIFE SET TO 100%”. Your oil life is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2004-2005

Turn the ignition to run (one position before starting engine).
Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”.
Press RESET control to reset oil change.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2006-2007

Turn the ignition to run (one position before starting engine).
Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010

Turn the ignition to run (one position before starting engine).
Press SETUP to display OIL LIFE %.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Ford Trucks Explorer / Sport Trac

2006-2007

Turn the ignition to run (one position before starting engine).
Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010

Turn the ignition to run (one position before starting engine).
Press SETUP to display OIL LIFE %.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1999-2001

Turn the ignition to run (one position before starting engine).
press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2002-2003

Turn the ignition to run (one position before starting engine).
Press the SETUP control to access the System Check function.
Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”.
Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”.
Press and hold the RESET control to display “OIL LIFE SET TO 100%”. Your oil life is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2004-2005

Turn the ignition to run (one position before starting engine).
Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”.
Press RESET control to reset oil change.
Turn the ignition off and then start the engine to verify the indicator has been reset.